wood powder

Posted by Liu Yi over 6 months ago

Blister board As the name implies, the blister board needs to be hot-press blistered on the surface of the substrate. Its substrate is a density board, the surface with PVC paste by hot pressing after forming. Its substrate has chosen the MDF rather than the particle board, because the MDF can be adapted to the surface of the milling without deformation, debris, and the particleboard is made of wood crushed, if the surface will be smashed Deformation, affecting the quality of this cabinet cabinet door. Advantages: rich colors, monochrome color pure, not easy to crack deformation, wear, heat, dirt, anti-fade, you can easily carry out daily cleaning and maintenance. Disadvantages: MDF is mainly made of wood powder, therefore, if the use of poor quality MDF as a substrate, then the moisture resistance is poor, the water will swell up, affecting the use. At the same time, because the MDF material is wood flour, such as cabinet door handles and other accessories need to be fixed in the door on the " [url=http://unitedprescanoncity.org/deck/1782.html]fence products made from polymer composites[/url] , [url=http://unitedprescanoncity.org/deck/3895.html]discounted outdoor fencing[/url] , [url=http://wallpanel.cf/outdoor-wall-panel/walls-decorative-wood-roof-panels.html]walls decorative wood roof panels[/url] , [url=http://wallpanel.cf/indoor-wall-panel/exterior-wall-sheathing-board.html]exterior wall sheathing board[/url] "