wiping the cement mortar leveling

Posted by Wangkiky Wangkiky over 6 months ago

attention to what matters? Here we come together to school insulation board The installation method and installation process. First, the installation of insulation board 1: standard board size specifications 300 * 300, the diagonal error of less than 3mm, cutting can be used for small cutting saw cutting, insulation board size allowable deviation of �� 2. 2: Mesh Closure: Doors and windows, deformation joints on both sides of the sticky mesh cloth, the total width of about 200, part of the width of the flip package is 80, the specific practices are as follows: Mesh crop length of 180 plus plate thickness. First in the flip package wipe the length of 80 for the width of 2 dedicated adhesive, and then pressed into 80 long mesh cloth, the rest thrown aside. 3: The configured special adhesive smear behind the composite foam cement board, adhesive compaction thickness of about 3, in order to ensure a strong bond, it is best to use a full touch method, also can use the sticky method and Article point method. 4: Sticky method: use toothed trowel knife special adhesive horizontal evenly wipe the foam cement board, the strip width 10, the thickness of 10, in the distance 50. 5: Article point method: Use a trowel in the middle of each board around and use special adhesive, [url=http://pvcboardmanufacturer.com/wpc-product/6725.html]wholesale lumber plastic decking singapore[/url] [url=http://i-ubytovani.eu/pvc-fence/658.html]composite timber wood in malaysia[/url] [url=http://pvcboardprice.com/pvc-board/4701.html]cheap waterproofing formwork plywood sheet[/url]