viscosity of the appropriate re-construction

Posted by Wangkiky Wangkiky over 6 months ago

quality of waterborne wood coatings. 3, paint wrinkles Some construction workers in the use of water-based wood paint for flat coating, to take a one-time thick coating method, the results of fullness is excellent, but the film surface wrinkling phenomenon. The cause of the problem is the thick coating of water-based paint film at high temperatures, the surface of the film quickly dry film and thick inner layer is dry and slow, in the drying process of paint flow caused by poor tension, resulting in the final film surface uneven , That is wrinkled. So the construction, do not once thick coating, in particular, should not be directly dumping the method, should still take thin coating to ensure uniform coating dry film, to film formation effect. 4, poor adhesion summer temperature is high, in some areas of air humidity and large. General water-based wood paint construction, will find the coating layer between the adhesive is not strong, resulting in poor adhesion phenomenon, there is a layer between the layers of peeling off, or even like tearing the whole piece of tear. The direct cause of the poor adhesion between the layers of the paint is due to the fact that the paint is not polished during the construction of the paint. As the painter in a hurry, in the next process, without grinding, but directly painted on a paint on the film, coupled with high temperatures, wet paint film and dry film interface to form a [url=http://greendecking.co.uk/supplier/4215.html]sales on composite decking anti static[/url] [url=http://floor-tec.co.uk/composite-floor/3917.html]pvc wall cladding exterior mahogany[/url] [url=http://abcdeckco.com/diydeck/rhino-decking-reviews-air.html]rhino decking reviews air[/url]