protection products: cement board protective agent

Posted by Wangkiky Wangkiky over 6 months ago

corrosion treatment) or iron frame high frame skeleton (under normal circumstances do not have to do high processing, directly with 12mm splint base leveling base You can), keel spacing 300 �� 300 made of grid shape, leveling fixed, covered with 12mm thickness of the wood board or silicon calcium board to do the grassroots level. In the wet ground, you need to shop moisture-proof cloth, which can be placed charcoal to absorb water. Second, the application of cement board 1. Selection of 12mm thickness of wood cement board or 8mm cement board, the use of tungsten steel 120t saw blade to cut the required size of the plate, the incision does not require burr. 2. In the cement board on the opposite side of the sizing (too stick), the process is as follows: A. in the cement board from the edge of 1.5cm glue a circle; B. in the vertical and horizontal direction of the apron, every 10-15cm Application (requires the base level and the cement board of the sizing surface is not gray). 3. Sheet from the wall began to apply: reserved 5mm of the expansion joints; the cement board paste in the base of the cement surface, between the board and the board can stay 3-5mm or close fight. After laying, the expansion joints are [url=http://arabwpcdeck.com/eco/2074.html]مسبقة الصنع الخشب سطح المبارزة المواد[/url] [url=http://teakodeck.com/news/Wood-plastic-composite-decking-than-the-wooden-floor-to-which.html]Wood plastic composite decking than the wooden floor to which[/url] [url=http://dmdecks.com/composite-deck/4392.html]decorative wood hard board[/url]