geothermal floor production

Posted by Liu Yi over 6 months ago

for geothermal. However, the use of solid wood flooring for geothermal to solve the problem of wood swelling and shrinkage in case of heat and easy to crack, which is also the key technology for wood flooring can be used to solve the geothermal needs. Therefore, the preferred wood growth must reach 60-80 years, the longer the growth cycle the more dense wood texture, the better the stability. Then the moisture content of wood control in 8% -10%, and after 250 days of ultra-long health (that is, the wood after repeated humidification and then drying process), there is no cracking deformation can be used for floor production. Under normal circumstances, pure solid wood floor production rate can reach 90%, but geothermal floor production rate of only 60%. Because of the same moisture content of each parquet, and then through the mortise and tenon lock stitching, even if there is contraction of the whole piece of wooden floor at the same time moving, there will be no crack between the " [url=http://diywoodfloors.co.uk/wall-panel/Outdoor-pool-pavilion-kit.html]Outdoor pool pavilion kit[/url] , [url=http://diywoodfloors.co.uk/boat-deck/20-by-16-deck-cost-in-Hong-Kong.html]20 by 16 deck cost in Hong Kong[/url] " " [url=http://unitedprescanoncity.org/deck/2425.html]best price on compost exterior decking[/url] , [url=http://unitedprescanoncity.org/fence/3365.html]wood plastic composite decking south africa[/url] "