exceed 55 degrees Celsius

Posted by Liu Yi over 6 months ago

operating properly and open the floor a few weeks before the installation of geothermal, window ventilation, so that all the remaining moisture evaporated. Three to four days before the floor was installed, the heating system was reduced to a suitable installation temperature (approximately 18 ± 3 degrees Celsius in the room). Geothermal heating must use standard functional components, the heating system to reach the cement floor temperature should not exceed 55 degrees Celsius. There is a geothermal heating system on the ground, is strictly prohibited on the ground ticking, nails, holes and so on. After the floor pavement, in use should ensure that the geothermal system heating temperature uniformity, to avoid local area surface temperature is too high, try to keep the surface temperature. C, construction preparation site preparation should be carried out according to the following steps: first check the ground flatness, and whether there is a buried or ground heating system. Negotiate with the customer to " [url=http://diywoodfloors.co.uk/eco-floor/what-is-the-best-cost-for-new-decking-boards.html]what is the best cost for new decking boards[/url] , [url=http://diywoodfloors.co.uk/outdoor-fence/prices-for-plastic-deck-board-and-railing.html]prices for plastic deck board and railing[/url] , [url=http://outdoordecksale.co.uk/supplier/4998.html]attaching fence posts to a retaining wall[/url] , [url=http://outdoordecksale.co.uk/pavilion/3230.html]cost of fencing per foot installed[/url] "