calculation and determination

Posted by Wangkiky Wangkiky over 6 months ago

calculation and determination, the general should be arranged at equal intervals, but at the ridge along the ridge should be along the sides Arranged together, arranged near the gutter. Side wall beam should be placed in the layout of windows and doors, cornices, awnings and other components of the set and envelope materials to determine the requirements. 4. Arrangement of Supporting and Rigid Tie Rods (1) In each temperature section or staged section, a support system capable of independently forming a space-stable structure shall be provided separately. (2) In the setting of inter-column support between the opening should be set at the same time lateral roof support to form a geometric invariant system. (3) The end support should be located at the end of the temperature section of the first or second open space. Pillar spacing between the columns should be based on longitudinal conditions of housing and installation conditions to determine, generally take 30 ~ 45m, a crane should not be greater than 60m. (4) When the height of the house is large, the support between the columns should be set in layers; when the width of the house is larger than 60m, support should be set properly in the columns. (5) When the end support is located at the second end of the compartment, a rigid tie bar shall be provided at the corresponding position of the first compartment. (6) wood tiles singapore internal glass doors oak mosaic laminate flooring low price wpc flooring