The main purpose and principle of hammer crusher

Posted by Wangkiky Wangkiky over 6 months ago

Hammer crusher is suitable for the crushing of various brittle materials. The crushed material is coal, salt, baiya, gypsum, alum, brick, limestone, etc. The compressive strength of hammer crusher is no more than 100 mpa and humidity is not greater than 15%. It is mainly used for cement, mining, coal, electricity, chemical industry and building materials etc, also used for broken fiber structure, strong elasticity and toughness of broken wood, paper, or broken asbestos cement waste, can be recycled asbestos fiber and so on. Hammer crusher not only can be used in crushing production line, sand production line, but also can replace cone crusher in the dressing line. The main working part of hammer crusher is the rotor with hammer (also called hammerhead).[url=http://vacuumfurnacedesign.com/furnace/vacuum-brazing-furnace-ChinVacuum-furnace-SIMUWU-aluminum-sol-ering-furnace.html]vacuum brazing furnace ChinVacuum furnace SIMUWU aluminum sol ering furnace[/url] The rotor consists of spindle, disc, pin shaft and hammer. The motor drives the rotor to rotate at high speed in the broken chamber. The material is crushed by the crack, shock, shear and grinding of the hammer of the high speed motion.[url=http://vacuumfurnacedesign.com/furnace/Suppo-customize-vacuum-tempering-furnace-with-service.html]Suppo customize vacuum tempering furnace with service[/url] At the bottom of the rotor and sieve plate and grinding material is less than the screen hole size in graded Through the sieve plate, is greater than the screen hole size of the coarse grained resistance continues to hit by the hammer on the sieve plate and grinding, and finally through the sieve plate outside.[url=http://vacuumfurnacedesign.com/furnace/vacuum-hot-press-horizonta-sintering-furnace.html]vacuum hot press horizonta sintering furnace[/url]