The choice of stainless steel spiral angle

Posted by Wangkiky Wangkiky over 6 months ago

Automatic lathes due to the need for continuous high-speed production, the parts of the material requirements are higher, especially when processing copper pieces, but the hardware electronic equipment on the performance requirements of the increase in large quantities of difficult processing materials to be completed automatically, stainless steel is the most Difficult to process one of the materials.[url=http://stainlesssteelprices.com/steel-products/954.html]wholesales straight cut stainless steel wire[/url] Carbide left drilling is the processing of stainless steel weapon. In the processing of parts, because it is continuous cutting, tungsten steel left drilling requirements are relatively high, tungsten steel left drilling longer life, the more parts processing, the lower the cost of production. The life of the tool is related to its own material and cutting speed, but also with the cutting material. Copper is the most advanced material for cutting the tungsten steel, which is the most difficult material to deal with, especially stainless steel.[url=http://stainlesssteelcoilprice.com/steel-products/862.html]���֧ԧ�ݧڧ��ӧ��ߧѧ� ����ܧݧѧէܧ� �ڧ� �ߧ֧�اѧӧ֧��֧� ���ѧݧ�[/url] Through our jawaysteel company and you automatic lathe processing co-manufacturers of repeated experiments, tungsten steel left corner apex 120 most suitable for processing stainless steel. The angle between the transverse blade and the main cutting edge is usually 55 ��. The size of the horizontal bevel varies with the size of the angle after sharpening. After the angle is large, the horizontal cutting edge angle decreases, the transverse blade becomes longer, the circumferential force increases when drilling. After the angle is small, the situation is the opposite.[url=http://304stainlesssteelsheet.com/steel-plate/5148.html]color pvd coating color embossed stainless steel[/url] The rake angle is generally 40 �� ~ 45 ��, the outer edge of the largest, near the center of the drill into a negative rake angle. The greater the helix angle of the twist drill, the greater the rake angle. Tungsten steel left drill rear corner is also changing, the outer edge of the smallest, near the center of the drill at the corner of the largest. Generally 8 �� ~ 12 ��.[url=http://304stainlesssteelsheet.com/steel-coil/6794.html]inch sus 439 sus304 stainless steel pipe pipe[/url]