SCR moves to trigger

Posted by Wangkiky Wangkiky over 6 months ago

Yu electric AIJK6 silicon controlled to move to trigger is the application of single chip microcomputer technology of intelligent triggers, powerful functions and high reliability, can be suitable for all kinds of resistance wire, silicon carbide and load the transformer step-down silicon molybdenum rods, tungsten and other various types of industrial furnace, can also be used for motor soft start control. It has the following functions: (0~20mA (0~5V)/4~20mA (1~5V) signal compatible input. The computer technology is used to modify the linearized power. When the load is resistive, the output power is proportional to the input signal. Detection of missing phase, overcurrent detection and alarm function.[url=http://vacuumpumpproducts.com/vacuum-pumps/Refrigeration-Vacuum-Pump-Oildual-Voltage-Vacuum-Pumpvacuum-Pump-Industrial.html]Refrigeration Vacuum Pump Oildual Voltage Vacuum Pumpvacuum Pump Industrial[/url] The automatic synchronizing function, when connecting the thyristor trigger line, does not need to be in the phase sequence. It adopts full photoelectric isolation and "burn not bad" technology, the reliability is very high, which causes little interference to the input end. Current feedback or delay time adjustable soft start/soft stop function can adapt to silicon mo rod, tungsten wire, motor and inductive load. The power supply of the switch can be supplied directly with 220VAC power supply, and the output of dc power supply is 5V and 24V.[url=http://customvacuumfurnace.com/furnace-sales/Ceramic-titanium-coating-machine.html]Ceramic titanium coating machine[/url]