Router settings:

Posted by Wangkiky Wangkiky over 6 months ago

computer set , first set the usual computer [url=http://switchonsale.com/huawei/Huawei_S5700_24Tp_Si_Ac_24_Port_Managed_Ethernet_Sfp_Switch.html]Huawei S5700 24Tp Si Ac 24 Port Managed Ethernet Sfp Switch[/url] settings. First, connect the incoming ports to the WAN port with a single wire, then connect the computer network cable to any LAN port. 1, open the browser on the computer, enter the URL 192.168.0.1 or 192.168.1.1. routers are generally explained, which one is. If you forget, just try the two. Different router brands are different. For example, the TP-LINK is 192.168.1.1. 2, after opening, you need to enter the password of the administrator of the router to log in. in general, the default account password is admin. If you forget, you can also reset Reset router, and you can use the default account password. After logging in, it is recommended to modify the management password. PS. this is the password for the administrator of the [url=http://switchonsale.com/huawei/Cisco_Catalyst_3560Cx_8Tc_S_Gigabit_Ethernet_Switch.html]Cisco Catalyst 3560Cx 8Tc S Gigabit Ethernet Switch[/url], not the WiFi password. 3, set up broadband account , enter the router management page, find a similar route settings inside the Internet settings such a place, I am TP-LINK, different brand management page is slightly different, but basically these settings. as shown above, the way to access the Internet is broadband Internet access, fill in your broadband account, password, and then click the connection button. 4, set the wireless name, password connection, to the wireless settings, set the WiFi's wireless name and password, whether to change the name or not, the key is the password. Set this to save, and then you can use WiFi happily. phone set by the way, by the way, do not use the computer, how to use the phone to set up the router directly. the direct use of a cable, the port and the router in general even on the line, only the use of the WAN, LAN and let it empty in the well, did not affect the connection; WiFi signal using a mobile phone, the router connected to the power, there will be a signal; connected to the WiFi signal after using a mobile phone on the browser 192.168.0.1 (or 192.168.1.1) management page, and then just like the settings on the computer. PS. has a different management page for different brands about how [url=http://switchonsale.com/huawei/Oem_Gpon_Wifi_Ont_Onu_Cm8245_Same_As_Hg8245H_English_Version.html]Oem Gpon Wifi Ont Onu Cm8245 Same As Hg8245H English Version[/url] devices limit the speed of the network.