Optional composite wood flooring

Posted by Wangkiky Wangkiky over 6 months ago

First, the stable material As a natural material, wood shrinkage and deformation is inevitable, [url=http://outdoorfloorsupplier.com/wholesale-deck/8728.html]Fireproof Cedar Wood Post[/url] the choice of composite wood flooring as far as possible the selection of relatively stable wood species, such as teak, pineapple grid (Indian eggplant), oak, Shorea (Palau), wood pods Beans and other species. Second, the wooden floor size Many people think that the harder the better the wood, it is not true, hard wood, although with good wear resistance,[url=http://outdoorfloorsupplier.com/wholesale-deck/7009.html]best quality for composite decking[/url] but relatively speaking, poor dimensional stability in the choice of composite wood floor size, try to choose narrow Short, although the effect of the laying of the floor as short as wide and beautiful, but the characteristics of wood, the smaller the size, the smaller the deformation. Third, the appearance of quality and precision machining of the test Check the floor for insect eyes (should not be greater than 1 mm), cracking, decay, mildew, dead knots and other defects. [url=http://outdoorfloorsupplier.com/wholesale-deck/6740.html]How To Hide Ugly Railroad Ties Retaining Wall[/url] For small details, color should not be too demanding, this is the natural properties of wood. Processing precision simple inspection, is free to take in the scene 8 to 10 on the floor to assemble the floor, hand touch, seeing the quality of its processing precision, smoothness is flat, whether the board between the seamless fit (patchwork gap should not Greater than 0.3 mm), and whether there is a significant level difference. Fourth, composite wood floor moisture content Composite wood flooring moisture content is a vital indicator, consumers should be how to judge? [url=http://outdoorfloorsupplier.com/affordable-floor/2539.html]Outdoor Wood Deck Bench With Backrest[/url] Try to choose the local temperature and humidity similar to the origin of the manufacturers of the floor. And then check the moisture content of the floor purchased, if the difference between the moisture content of between 1% to 2%, is a normal range, the moisture content of the floor water content of the two samples, Can be purchased. 5, wood floor paint film Paint the floor, you should also observe the lacquer surface film is uniform, plump, smooth, seamless paint, bubbling, holes, pitting, etc., and generally more wear-resistant paint floor burning with cigarettes for 20 seconds, Paint surface should not leave obvious traces. Choose the paint floor, the thickness of the paint should be moderate, if the surface paint is too thin, the floor of the wear resistance is poor. The film is too thick, adhesion will be reduced.