New fluidized bed technology.

Posted by Wangkiky Wangkiky over 6 months ago

Gases collected from pouring, solidifying and core workshops can be used as gas in the furnace, where harmful gases can be burned clean. After the completion of the T4 or T6 heat treatment process, the casting cools to the ambient temperature and is transported directly to the next procedure, such as sprue, riser and machining. Combining the casting process with this heat treatment process means that the furnace can be used to reclaim sand (treated sand) and to recycle rejected cores.[url=https://wholesalepumpsupply.com/pump-sale/718.html]waschbaer schn��rschuhe8.7ga12 high pressure pump[/url] To sum up, the above process is pollution-free and effective casting process. The combination of several major aluminum casting processes can greatly reduce the production cost. The results of the research on the casting enterprises using san-in-one heat treatment process show that the process can reduce the production cost by more than 30% on average.[url=https://wholesalepumpsupply.com/pump-sale/579.html]Wholesale China Trade oil free vacuum pump[/url] Emerging fluidized bed process: the castings are immersed in fluidized beds with flowing hot sand at work. CEC is a similar emerging fluidized bed technology, which can be used for the recovery of heat treatment, heat die, core sand and hot sand. It is suitable for semi-permanent mold or precision sand mold. As discussed earlier, the castings are treated in a high-oxygen environment. When the casting has just solidified, the process is carried out immediately, thus saving energy and time. This technique has the advantages of all the energy and environmental aspects of the sand lion three-in-one technology described above, which provides a very effective post-processing operation for certain castings including heat treatment.[url=https://wholesalepumpsupply.com/pump-sale/130.html]4" Dredging Equipment Sand Pump[/url]