Kitchen wood floor selection points

Posted by Liu Yi over 6 months ago

Low density of wood flooring is vulnerable to moisture and water vapor damage, so when buying the first floor to observe its appearance,[url=http://amstraders.in/cheap-floor/20766.html]diy make waterproof for deck[/url] look at the density of the plate. The density of the entire floor can also be calculated in a simple way, based on the density = mass / volume formula. In general: low density board density of less than 450 kg / cubic meter, medium density plate density of 450 kg -600 kg / cubic meter; high density board density 600 kg to 900 kg / cubic meter. Dripping water is to test the floor of the water absorption, free to take 1-2 floor, in the wood floor and the back of a few drops of water, after a certain period of time after the water, the decorative layer will be formed on the floating water is not absorbed, The side did not appear very obvious water swelling phenomenon,[url=http://amstraders.in/outdoor-fence/30065.html]toungue and groove composite decks[/url] so that the wood floor of the water absorption to meet the requirements. Will be a few pieces of wood floor together to see if there is a high and low difference, if there is a clear drop to prove that the floor appeared hot up the cold situation,[url=http://amstraders.in/solid-floor/19926.html]composite balcony made in the usa[/url] this floor is not suitable for high temperature kitchen.