Intermediate frequency electric furnace shutdown

Posted by Wangkiky Wangkiky over 6 months ago

Turn the potentiometer to the minimum, turn off the power supply, and then separate the main circuit switch. If the equipment is no longer used, the power supply of the medium frequency electric furnace cabinet should be cut off. Five, the equipment should always check the flow of water in the process of operation, for example, when the water is too small or when water is broken, it should be shut down immediately and reopen after the trouble is excluded. Six, intermediate frequency electric furnace after the shutdown if regularly check the cabinet and capacitor frame on the copper bar is connected with no loosening of the screw, such as loose should be tightened. Because of the common characteristics of the medium frequency electric furnace, the leakage protection and transportation can not be put up, and the improper use of the furnace will lead to the casualty of the personal electric shock and the damage to the equipment. 1. the disorderly connection is strictly prohibited. 2. no debris into parked electric cabinet, box.[url=http://customvacuumfurnace.com/furnace-manufacturers/99.html]EXW Price High Temperature Well Type Sintering Furnace With Four Sides Heaters[/url] 3.. Work must wear insulated shoes and other protective equipment. 4., check the EAF must turn off the power, and hang the warning board. There must be more than two people's guardianship. After the repair is finished, the tools must be cleaned first. After the inspection, the electrical equipment is really surrounded by no one, and then it can be closed for trial operation. 5. it is strictly forbidden to take the disease. After drinking, operate on the machine.[url=http://customvacuumfurnace.com/furnace-sales/mirror-PVD-coating-machine.html]mirror PVD coating machine[/url] The 6. metal material not to leave, thermometer after use should organizethe good. 7. the whole equipment of the electric furnace should be kept clean and sanitary, and the phenomenon of water leakage and water flooding should be strictly prohibited. 8. the non workers are strictly forbidden to go to the machine and free in and out of the control room. 9: intermediate frequency electric furnace external wire (copper) and other exposed parts touch has the risk of electric shock in the state of switching on! If the maintenance should be adjusted or repaired, the power supply should be cut off. 10. in order to keep your life safe, please keep every employee in strict compliance with every regulation and safety and take your work seriously.[url=http://buyvacuumfurnace.com/vacuum/1534.html]Energy Saving Pit Type Vacuum Quenching Furnace For Metal Parts[/url]