Installation of the wainscoting panels

Posted by Liu Er over 6 months ago

The panel should be allocated at the end. 2. Baseboard installation The baseboard hooks are fixed to the wall with expansion screws or steel nails. The distance between the hook hole and the ground is 7.8cm. A hook is fixed every 60cm, and then the skirting line, which has been machined into a 45° angle, is hung on the hook. In regions with high humidity, two baseboards must be fitted with suitable expansion joints, especially in the corners of furniture, and expansion joints should be considered more. 3. Installation of the wainscoting panels Insert the sidings into the baseboard from left to right. The starting block should be grooved from corner to corner. Place expansion screws or steel nails 1.5 cm from the escutcheon plate (in the middle of the plate width), Related links: plastic white picket fence plastic 2 x 4 redwood lumber floor outdoor decking board price