Influence of gas generator structure on carbon content

Posted by Wangkiky Wangkiky over 6 months ago

There is a certain relationship between the structure of the gas producer and the carbon content of the ash and slag. [url=http://vacuumpumpproducts.com/vacuum-pumps/API-11ax-Subsurface-Sucker-Rod-Pump-for-Oilfield.html]API 11ax Subsurface Sucker Rod Pump for Oilfield[/url] If the structure of the gas generator is not reasonable, the coal ash will be uneven. If the coal is not uniform, the material in the furnace is not uniform, so the gasification in the furnace is abnormal. Because the structure of the furnace itself is not reasonable or there is a defect in the manufacture and assembly, the ash will be made not too uniform. [url=http://buyvacuumfurnace.com/vacuum/2650.html]sintered high temperature resistance molybdenum crucible for vacuum furnace[/url] Such as the furnace grate of the elliptical skirt, is beyond the scope of the grate outlet uneven, rough machining, size error, the size of the position is not correct, gray knife angle is not appropriate, the skirt plate and the ash tray gap is not uniform, the water jacket installation position deviation are affecting the normal operation of the furnace, so that the carbon content in ash increased. In addition, if the modern new complete gasification process is used, the carbon content of the ash can be greatly reduced.[url=http://customvacuumfurnace.com/furnace-sales/1600C-Laboratory-Horizontal-Tube-Furnace.html]1600C Laboratory Horizontal Tube Furnace[/url]