In general, the URL of the management page is 192.168.1.1

Posted by Wangkiky Wangkiky over 6 months ago

There are different user names and password manuals. There are also different brands using http://192.168.0.1.. 2., for broadband users, we need to set the connection type to (PPPoE) and enter the broadband user name and password. Where is this step? Now many broadband users on the computer to create a virtual dial-up connection (or the third party, every time the Internet dial-up software) to click "broadband connection" to connect to the network; and the so-called PPPoE is used for virtual machine to dial with Ethernet, WAN here port setting type selection for the role of PPPoE is to will have on the computer dial-up work transferred to the wireless router in the automatic operation, so after the Internet as long as the open wireless router will automatically dial-up connection, no need to run "broadband connection" on the computer. Time limited broadband users should pay attention: after setting up this item, turn on the wireless router, that is, start the time charge, so if you want to disconnect the network, stop charging, you need to turn off the wireless router, and it doesn't matter to the broadband users. Special reminder: this step is the premise and key to form home wireless LAN. Skipping this step can easily lead to a "no gateway response" after connecting with small 7. The reason is that broadband virtual dial-up is not available on mobile phones. 3. open wireless routing. Select the menu wireless parameters, basic settings, detailed settings as shown below, the meaning of each parameter is: SSID: the name of the network identifies the wireless network to the wireless network, that is your own names, because the same manufacturer launched a wireless router or AP use the same SSID, it is recommended that you SSID named some of the character's name. The number of combinations of letters and words use only, not available Chinese. Frequency band: this item is used to select the frequency segment of the wireless network, which can be selected from 1 to 13.. Mode: this option is used to select the working mode of the router, the 11M mode with 802.11b bandwidth and the 802.11g mode of 54M bandwidth (which is compatible with 802.11b), and generally choose the latter. Open wireless function: if you want to use the wireless function of the router, you must choose this item, so that the host in the wireless network can access and access the wired network. SSID radio: this function allows for router SSID to the wireless network within the host broadcast. If you don't want to let their own wireless network by others to search through the SSID name, then the best "ban SSID radio." your wireless network can still be used, but does not appear in the list of available networks by others to search. At this point in the wireless connection management tool WINDOWS XP is scanning to the wireless network, need to set up or use third party software to scan.