Connection setting of telecommunication fiber optic cat and wireless router

Posted by Wangkiky Wangkiky over 6 months ago

Nowadays, the residential area has generally covered the optical [url=http://datacommunicationdevice.com/faq/443_port_is_what_443_port_details.html]443 port is what? 443 port details[/url]. If you want to use the wireless router to access the Internet, then the setup method is different from the way of setting up ADSL. I also toss for a while because of this problem. First of all, optical fiber cat bar. It has the function of router. If you input 192.168.1.1 directly into ie without routing, then it will enter optical fiber cat. If you do not know how to connect the wire: the installation and setting of the wireless router, the connection method of the cat, the router, the computer The first step is to link the wireless router to the computer The second step in the browser input 192.168.1.1 into the [url=http://datacommunicationdevice.com/faq/What_do_apple_iOS_do_with_the_wireless_signal_on_the_net.html]What do apple iOS do with the wireless signal on the net?[/url] interface account with the password is admin due to fiber cat and wireless router addresses are the same, will cause the conflict, so the routing address changes in the network parameters, the LAN set, modify the IP address changes as shown in figure 192.168.2.1 Click Save and restart the router. The third step, start setting up the wizard as required step by step Let the router automatically choose the way to surf the Internet, and then the next step Then set the SSID name and password, click the next step, restart the router after completion, and finally connect the WAN port of the wireless router to the LAN port of the telecom light cat. Then you can access the [url=http://datacommunicationdevice.com/faq/Why_the_default_gateway_of_the_router_is_192.168.1.1.html]Why the default gateway of the router is 192.168.1.1[/url].