thermal insulation

Posted by Wangkiky Wangkiky over 6 months ago

Development of thermal insulation and putty for thermal insulation With the elastic emulsion as the film, with ceramic hollow beads, shaped phase change material, heavy calcium and talc as a filler, in the aid of [url=http://customcompositedeck.com/pvc-fence/2616.html]decorative metal fencing Saudi Arabia[/url] additives and water made under the paste phase change energy storage thermal insulation elastic putty, with the exception of Has good adhesion strength, elasticity, water resistance, resistance to permeability and permeability, but also has a phase change energy storage temperature controltemperature control and thermal insulation function, and external thermal insulation system has excellent compatibility, matching Sexual and synergistic efficiency of the new construction and existing buildings in general the implementation of "external wall insulation [url=http://customcompositedeck.com/pvc-fence/2615.html]suppliers of plastic wood perth[/url] engineering technology", granular slurry external wall insulation system. Over the past few years has proved that: the insulation system due to the existence of more joints, the material stress, dimensional stability is poor, thermal [url=http://customcompositedeck.com/pvc-fence/2614.html]can i apply composite deck material directly on a concrete patio[/url] stress caused by large deformation and other defects, can easily cause insulation layer cracking, and then lead to cracks in the protective layer. The external putty is the protective layer of leveling material, and the external insulation system supporting the putty should have the appropriate bonding strength, excellent anti-cracking performance, water resistance, permeability and breathability, in addition, should also have insulation cooling performance, In order to reduce the generation of temperature cracks and improve the indoor thermal environment. In this study, the elastic [url=http://usastarker.com/export-decking/837.html]extending floor joists for decking[/url] emulsion was used as the film-forming material, and the silica-alumina ceramic hollow microspheres were used as the insulation filler.