board, remove the surface of the sheet material

Posted by Wangkiky Wangkiky over 6 months ago

equivalent to 8% -10% of the cement is injected into the slab. As the lime and carbon dioxide in the billet produce an exothermic reaction, the temperature is up to 120 �� C, and calcium carbonate with a certain strength and hardness is produced. Machine out to get the final strength of about 50% of the strength, to achieve the requirements of forming stripping. Hot forming process to shorten the molding time to 4-5 min, hot plate after 2 weeks to get the final strength. Hot pressing method simplifies the production process, without the need to tighten the device, without the need to set hardened curing kiln, greatly reduced the number of plates and hot plate loopback and processing devices, without pressure relief and stripping facilities, reducing the production site. Xiao Bian Summary: Through the introduction of the above, I believe we have a certain understanding of the production process of cement wood board, which semi-dry method is the commonly used production methods, but also more mature and reliable. Knowledge of the production process of cement wood board, Xiaobian introduced here today, and need to know more about the knowledge of cement wood board, welcome to continue to pay attention to [url=http://greendecking.co.uk/diy-deck/4806.html]wooden boat garden bench[/url] [url=http://deckingboardsforsale.com/eco-deck/1061.html]backyard wood flooring[/url] [url=http://teakodeck.com/news/-Ecological-wood-is-not-wood-plastic-material.html] Ecological wood is not wood plastic material[/url]