Stainless steel high pressure thick wall elbow

Posted by Wangkiky Wangkiky over 6 months ago

1. High tensile strength. General steel bending strength of about 300Mpa, copper elbow tensile strength of about 200Mpa, while the stainless steel elbow tensile strength of 2 times the steel pipe, copper pipe for 3 times.[url=http://304stainlesssteelsheet.com/steel-coil/1489.html]Stainless Steel hand rail hardware[/url] 2. good corrosion performance. The reason for the leakage of the pipeline is that the largest "killer" is the chloride ion, and in practice 304 stainless steel is resistant to 200ppm chloride, 316 stainless steel can withstand 1000ppm of chloride natural water, which is particularly important for large buildings.[url=http://steelsheetprices.com/steel-coil/927.html]stainless steel welded tube aisi 201[/url] 3. Environmental protection. Stainless steel elbow non-toxic, no fouling, to prevent the secondary pollution of the pipeline; resistant to acid and alkali salt solution; compared with other pipe, leaching into the water of heavy metals (Ni, Cr, Mo) The amount of metal (Na, Fe, Ca) leaching into pure water is the least; the product can recover 100%.[url=https://www.stainlesssteelgrade.com/bobina-de-acero/6018.html]304 2B Tratamiento 1mm 304 Bobina de acero inoxidable[/url] The elbow is bent with a set of bending molds, mainly used for oil, gas, infusion, etc., in the aircraft and its engine occupies a very important position. The material of the elbow is cast iron, stainless steel, alloy steel, can be cast iron, carbon steel, nonferrous metals and plastics.[url=https://www.stainlesssteelgrade.com/chapa-de-acero/5963.html]2b Acabado Superficial 410 201 Acero Inoxidable Metal[/url]