Principle of equipment structure of high pressure mill

Posted by Wangkiky Wangkiky over 6 months ago

Mill equipment structure principle, high pressure mill is used for crushing mohs hardness such as barite, limestone, ceramic, slag is not greater than 9.3, and the humidity below 6% of non flammable and explosive mines, metallurgy, chemical industry, building materials industry more than 280 kinds of materials such as high fine milling processing, the finished product granularity range of 80-425 mesh adjustment (the 1000 mesh). The high pressure pulverizer can produce 30-80 % coarse powder by adding special device. In the main engine of the high pressure mill, the high pressure spring with the pressure of 1000-1500 kg is attached to the grinding roller hanger. Began to work, grinding roll around the spindle rotation, and under the effect of high pressure spring and centrifugal force, close to the ring rolling, the rolling pressure is higher than the same power under the condition of Raymond mill 1.2 times, so the production is greatly improved. When the material into the grinding chamber, the shovel knife scooping up into between grinding roller and grinding ring rolling, rolling powder with blower after cycle into the analysis of wind machine, qualified fine powder with the gas flows into the whirlwind powder is the finished product, large particles grain fall back into the ground. The circulating wind returns the blower to repeat the above process, and the residual wind enters the bag filter purification. When the grinding roller and the grinding ring achieve certain wear, adjust the length of the high pressure spring and keep the constant pressure between the grinding roller and the grinding ring. Thus ensuring stable yield and fineness. [url=http://vacuumcoatingmachine.com]vacuum coating machine[/url]